HOW TO INSTALL AND CONTROL HOVERBOARD

HOW TO INSTALL AND CONTROL HOVERBOARD

The one wheel scooter was officially launched in March 2016, the successor of self balance scooter - the first self balance scooter with dual control mode. So how to install and control self balance scooter? The following article will help you answer this question.

The design and construction of one wheel scooter is based on the predecessor hoverboard version. But there are certain upgrades and improvements. Some improvements of one wheel scooter are large wheels of 10 inches, C-shaped control bar, exclusive smartphone application... However, the first thing you need to care about is how to install one wheel scooter after purchase.

Here are the installation steps and how to ride self balancing scooter:

- Step 1: Remove the 2-wheel electric scooter body, open the wing brace.

- Step 2: Remove the seat cushion, align the plug section with the pin in the seat cushion with the plug that has no latch in the support bar and perform the inner lock.

- Step 3: Open the quick joint on the support bar, align the groove in the seat cushion with the convex section in the support bar. How to fit and then close the quick joint.

- Step 4: If you want to adjust the seat height, you only need to open the quick joint first. And then adjust the seat cushion so that the seat achieves the proper height. After adjusting to your needs, close the quick joint.

After completing the installation, users need to thoroughly check the self balancing scooter status. The article will provide some tips on how to ride self balancing scooter.

Instructions for riding a self balancing scooter are as follows:

1. You need to wear protective gear when driving this 2-wheel electric scooter.

2. Check the safety of hoverboard:

- For the first use, you need to open the Bluetooth mode of the smartphone and connect to the Application. To check the current power of self balancing scooters and perform the Application's self-diagnosis function.

- After that, you can open the wing brace, open the power switch and press the ‘A’ key on the remote control to drive the self balancing scooters.

- With the first time controlling self-balancing electric scooter first. You need to adjust the speed to low through the Application to ensure safety.

If you are wondering how to download and use the application on a smartphone, you have access to the manufacturer's website.

The application is used on iOS 7.0 and above and Android 4.3 and above. Because of Bluetooth 6.0 compatibility, you need to follow the steps before downloading the application:

The following steps when downloading applications:

- Step 1: You can prepare a phone with an operating system lower than Android 6.0 operating system.

- Step 2: Download the exclusive application of self balancing electric scooter
 Latest version 2.0 and connected to the product.

- Step 3: After connecting, click on Settings above the interface, then click đó Firmware Update ’to perform software update.

- Step 4: You continue to press the ‘Update Check’ button and press the ‘Confirm’ button displayed above the pop-up window. At this time, the application will start updating the software.

- Step 5: You restart your smartphone and disconnect after the software update is complete.
For smartphones with operating systems higher than the Android 6.0 operating system, it is possible to connect to normal products.

Thus, after downloading the application, you need to perform the tests mentioned above. For those who are new to self balancing electric scooter. You should practice controlling the self balancing electric scooter in a sitting position before switching to standing position. Press your foot once on the board and you will hear a click-like sound to activate the self-balancing system.

How to ride a self balancing electric scooter as follows:

- Let electric scooter for kids move forward or backward. You need to tilt your body forward or backwards.

- To rotate the hoverboard, you need to rely on one leg on the seat, the hoverboard will spin.

- To hoverboard, you just need to sit up straight.

After controlling the electric scooter for kids smoothly sitting in a sitting position. You can try the vertical control position with the same steps.

Hoverboard price is very affordable:

Beginners of self balance scooter need to control speed. Especially when rotating the hoverboard. Using self balance scooter owns a self-balancing mechanism. The driver self balance scooter can still fall if tilted too much forward or backward.

The self balance scooter is one of the latest products of the manufacturer. The world's leading smart transport products, self balance scooter. The self balance scooter has been established since 2004 and so far. Hoverboard price is very affordable. Price of hoverboard is often very interested by many people. How much is a hoverboard? or How much due to hoverboard cost? The price of hoverboard is usually priced from 200 $ - 1000 $. The hoverboard has built a system of R&D, production, logistics and marketing centers in several countries such as the US, Belgium and China. The products of self balance scooter are favored by customers all over the world because of their unique, convenient and high quality.